The Snapfire 8

The snapfire 8 is and 8 shot semiautomatic pistol.  The trigger pull primes the spring, turns the turret and fires the dart.   
This is out in some countries but not in the US and hasbro has confirmed that it (and the stockade) will not be released in the US this year.

As you can see from this pic the snapfire 8 is actually powered by a extension spring rather than a compression spring.  The spring can be adjusted by the knob on the bottom of the grip or  by the switch in the grip.

Pyragon Drum Internals

Pyragon drum internals

I just had to see how this thing worked.  It's much more simple than I was expecting, which is pretty impressive from a design standpoint.

I do not recommend taking this thing apart.  There are a total of 11 springs, most of which do not want to cooperate.

Just take a look at these pictures and save your self the time of having to figure out exactly how to put this thing back together to get it to work.

The Octo-Shot by MIG

This is the octo-shot!
(which is a modded triple shot)
With the right spring and proper modding it can get ranges of 140ft
Here is the vid to prove it

Full write up after the jump!

Stockade, Internals & Review

The Elite stockade will be the elite version of the barricade. At this point (9/4) it's still only available in the UK.

Here is what we All care about, the guts

 These motors are NOT the same as the hailfire or the rayven.  These are stubby and short and not the standard size motor you see in rayvens barricades or any other flyweel that I know of

More pics after the jump.

Elite Draw Extention & Spring compression (with recon to retaliator conversion)

These mods will cover how to:

• Remove ARs
• Increase usable volume of the plunger tube
• Preload the spring
• Install the Retaliator internals into a Recon

The power mods have this blaster (Retalicon?) hitting about 75ft flat as long as the darts don't swerve into the ground out of the barrel.  Angled the ranges are over 100ft.

To install Retaliator internals into a Recon shell Very little work needs to be done.  It only needs some of the ribs to be ground down and a plate in the back to hold the spring in while allowing the plunger rod to go through.

BlasterPro Auto Fire E5000

The guys at Maya Group were nice enough to send me a Blaster Pro try out and review for the greater good of the internet.

This thing is pretty impressive.  If you were turned off by Xploderz because of their lack of trigger or the tendency of the breech to destroy ammo, both of those problems have been fixed.  What these things do have in common with Xploderz is a nice strong spring and big plunger tube.
Overall the great ranges and rate of fire along with a much cooler look make this blaster worth checking out.

Tech Target Internals Replacement

This mod maximizes the potential of the Tech Target while keeping the stock look. I have tried many other TTG mods such as the standard coupler, single barrel, and MDET but this is by far my favorite method.
Materials
-1" PETG Tubing
-3/8" square rod
-K26 spring
-1x 1/2" PVC Coupler
-Small segment of 1/2" SCH 40 PVC
-E-Tape
-Packing Tape(Or just use E-tape)
-1x 6/32 Hex Locknut
-1x 2" long 6/32 screw
-2x 1.5" long 6/32 screw
-1x NF plungerhead w/ O-ring or equivalent